Premium Tile & Stone Installation in Washington

Tile & Stone. Installation. Done Right.

See the difference before you hire us.See pricing and real project videos below.

Expert installation for showers, bathrooms, backsplashes, floors, fireplaces, large-format porcelain, marble, granite and natural stone. Backed by 15+ years of hands-on experience and 100+ completed jobs.

Have a photo?Send photos, dimensions and material details if available. We can review the scope and provide a clear next step.

Get a Free Estimate →Send Project DetailsCall or Text →(360) 540-8012

Peakstone tile and stone installation project

Licensed • Bonded • InsuredCheck License →

15+ Years ExperienceView Tile Services →

Customer ReviewsRead Reviews →

Real Project VideosWatch Our Work →

Service AreaCheck Service Area →

Licensed • Bonded • InsuredWA License: PEAKSL*759Q1Verify Washington License →

★★★★★

Thumbtack

★★★★★

What We Install

Choose the service you need.

Shower & Bathroom Tile

Waterproof systems and finished tile work for showers, walls, floors, niches and benches.

View Project Details →

Kitchen Backsplash

Custom porcelain, ceramic, glass, mosaic and stone backsplashes with clean transitions.

View Project Details →

Floor Tile

Flat-floor preparation, room geometry and full mortar coverage for a stronger, longer-lasting tile installation.

View Project Details →

Fireplace Tile & Stone

Fireplace surrounds, hearths and feature walls with planned joints, edges and finished details.

View Project Details →

Natural Stone

Marble, granite, quartzite, travertine, mosaics and natural stone installed with material-specific care.

View Project Details →

Large-Format Tile

Seam planning, pattern alignment, professional rail-guided cutting and controlled large-format installation.

View Project Details →

Outdoor Tile & Steps

Exterior tile, entries and steps with careful layout, clean edges and durable installation details.

View Project Details →

Mosaic Tile

Mosaic walls, accents and tub surrounds with precise cuts, alignment and detailed finish work.

View Project Details →

Pricing Guidance

Approximate Labor-Only Rates

Clear starting ranges for planning. Final pricing depends on substrate preparation, tile format, layout complexity, access and project scope.

Installation

Floor tile$10–16/ sq ft

Wall tile$12–18/ sq ft

Mosaic / shower floor$18–28/ sq ft

Kitchen backsplash$18–30/ sq ft

Large-format tile$15–25/ sq ft

Fireplace tile$16–28/ sq ft

Natural stone / marble / granite$18–35/ sq ft

Additional Work

Removal of existing tile$3–7/ sq ft

Substrate preparationPriced per project

WaterproofingPriced per project

Niches / shelves / trimCustom quote

45° corners / epoxy groutCustom quote

Our Work

See exactly how the work is done.

We do not ask you to trust a finished photo alone. We show the preparation, layout, cutting, waterproofing and finish details most contractors never put on camera, so you can see the quality of the work before choosing who works in your home.

Waterproofing

Custom Shower Pan PreparationThe finished tile is only as good as the base beneath it. We show the slope, drain placement and preparation work that will eventually be hidden, because this is where a reliable shower actually begins.

Project Video

45° Miter & Epoxy GroutClean corners and two-component grout

Project Video

Large-Format ShowerFrom cutting to finished installation

Stone Repair

Natural Marble Edge RestorationNatural marble does not forgive careless work. Watch how the edge is refined and restored so the finished stone looks clean, intentional and professionally fabricated rather than patched.

Real Project Detail

45° Miter Edge — Precision FinishOne of the most demanding finish details in tile and stone work. Watch how we shape and refine a 45° edge so two pieces meet in a crisp, nearly seamless corner. This is the kind of detail that separates careful craftsmanship from an average installation.

Real Project Detail

Laser-Plumb Shower PreparationPremium tile work starts before a single tile goes on the wall. We use laser references to verify straight, plumb framing and layout so the finished shower is built from measured geometry, not guesswork.

Real Project Detail

Mosaic Feature Strip InstallationSmall mosaic exposes every mistake. Here you can see the mortar application, alignment and vertical layout in real time. We show this part of the process because straight lines and controlled spacing are what make the finished feature look intentional.

Real Project Detail

Professional 45° Tile MiterClean 45° tile corners require accurate cuts, alignment and edge finishing. This close-up shows how we create a sharp, professional mitered corner.

Real Project Detail

Shower Pan Mortar Bed PreparationA shower floor is only as good as the base beneath it. Watch us shape and prepare the mortar bed carefully so the surface is ready for a controlled, durable tile installation. We show the work before it gets covered because that is where long-term quality begins.

Project Video

Precision Fixture CutoutsClean openings around drains and fixtures require controlled cutting, accurate measurements and patience. We show the actual cutting process so you can see the precision before the tile is installed.

Project Video

Rail-Guided Large-Format CuttingLarge-format porcelain leaves very little room for error. This rail-guided cutting setup keeps the cut controlled and straight across a large slab so the finished installation can align cleanly.

Project Video

Finished Bathroom WalkthroughComplete project tour showing the final layout, tile details, lighting, and finishes

Real Scope Example — $5,000

Tub-Surround Tile Installation

This project included purchasing and installing the prep materials, installing the tile and completing one recessed niche. Demolition and the tile material were not included in the $5,000 price.

01Prep materials purchased and installed.

02Tile installation and one recessed niche included.

03Demolition and tile material excluded.

Get a Free Estimate →

Service Area

Seattle to Everett • Tukwila to Tacoma

Also serving Puyallup, Spanaway, Lakewood and nearby communities.

Everett • Seattle • Tukwila • Tacoma • Puyallup • Spanaway • Lakewood

Simple Process

A Clear Path to the Finished Tile

Request an Estimate

Send project details and include photos, approximate measurements, material and the work you need completed.

On-Site Review

We inspect the space, confirm preparation and waterproofing requirements, measure accurately and discuss the finished result.

Detailed Written Estimate

You receive a defined scope so preparation, installation, materials, details and exclusions are understood before work begins.

Customer Reviews

What Homeowners Say About Peakstone

Review real feedback about communication, preparation, craftsmanship and finished results.

FAQ

Clear Answers Before You Start

How much does tile installation cost?

Pricing depends on material, format, preparation, layout, access, waterproofing, cuts, niches, corners and project size. Send photos and dimensions for an initial review.

Do you offer free estimates?

Yes. Start with the project form or call or text Peakstone. Photos, measurements and material information help us review the scope efficiently.

How does your estimate process work?

We review the initial information, confirm whether an on-site visit is needed, inspect the scope and prepare a written estimate.

What areas do you service in Washington?

Peakstone serves homeowners across the Seattle–Tacoma corridor, including Everett, Seattle, Tukwila, Tacoma, Puyallup, Spanaway, Lakewood and nearby communities. Availability depends on the exact project address, scope and schedule.

What types of tile and stone do you install?

Projects may include porcelain, ceramic, mosaics, large-format tile, marble, granite, quartzite, travertine and other natural stone, depending on the application.

Do you install waterproof shower systems?

Yes. Shower work can include preparation, WEDI waterproofing, pans, niches, benches, walls, floors, walk-in shower details and finished tile installation.

Are you licensed and insured?

Yes. Peakstone LLC is licensed, bonded and insured in Washington. WA contractor license: PEAKSL*759Q1.

Ready to plan your tile project?

Tell Us What You Want Installed

Add photos, measurements and the tile or stone material if available. We’ll review the project and let you know the next step.

Get a Free Estimate →Send Project Details